Is Old Wiring Holding Your Home Back?
The median home here was built in 1959, and much of that original wiring is still in the walls. It shows up in ways that are hard to ignore:
- Two prong outlets that will not take modern plugs
- Aluminum branch wiring from the late 1960s and early 1970s
- Only a handful of circuits for the whole house
- An insurer or home inspector flagging the wiring
- Breakers tripping because too many rooms share one circuit
Rewiring does not always mean the whole house. Many homes need only targeted work on the worst circuits, and we tell you honestly which kind you need.
Old wiring rarely fails all at once. It shows up as small annoyances first, like warm switch plates or breakers that trip when two appliances run. Catching it at that stage lets you plan the work on your schedule instead of after a failure.
Rewiring Work for Every Size of Job
Aluminum Wiring Pigtails and Repairs
Aluminum branch wiring can loosen and overheat at connections. We pigtail each connection to copper with approved connectors, or replace the worst circuits outright, depending on your budget and insurer.
Ungrounded Outlet Upgrade
Two prong outlets get upgraded to safe, code approved three prong outlets. We add true ground wires, install GFCI protection or run new circuits, whichever fits each room best.
Home Inspection Electrical Repairs
When an inspection report lists wiring items, we fix them line by line, from double tapped breakers to open junction boxes, and provide photos and an invoice for buyers and agents.
Partial Rewires
A partial rewire North Highlands owners choose replaces the circuits that matter most, like kitchens, bedrooms or anything with failing wire, while leaving sound wiring in place.
Whole House Rewires
A whole house rewire North Highlands homes sometimes need replaces every branch circuit, adds grounded outlets throughout and pairs well with a panel upgrade.
Not sure which one you need? A walkthrough tells us. We test circuits, check the panel and look at the wiring in the attic, then recommend the smallest job that makes the home safe.
Older Homes We Rewired Recently
Recent projects include an aluminum wiring replacement North Highlands owners booked for a Larchmont Village ranch home, a two bedroom partial rewire near Garfield Avenue and a rewire house Carmichael job done before a family moved in.



The Larchmont Village ranch home had aluminum branch wiring throughout. We pigtailed every device and replaced two kitchen circuits with copper. The Garfield Avenue rewire replaced brittle cloth wire in two bedrooms, and the Carmichael home was rewired before move in day, so the family unpacked into finished rooms.
Rewire Timeline: Walkthrough, Wiring, Patch and Inspection
A rewire is a bigger project, so you deserve a clear plan. We follow the same five steps as every job, stretched across the days your home needs.
- Call or Text Us: Tell us your home’s age, what you have noticed and any inspector or insurer notes. Photos of your outlets and panel help us plan the walkthrough.
- Get a Price Range: After a short talk, we give you a ballpark for a partial or whole house rewire, so you can budget before we walk through.
- Approve a Written Price: During the walkthrough, we map every circuit and wire route. You get a written price and a day by day schedule.
- We Do the Work: We wire room by room, keep openings small and restore power to finished rooms each evening where possible. Patching follows the wiring.
- Inspection and Sign Off: The county inspects rough wiring before walls close and again at the end. You get the final record for insurance and resale.
Wiring Faults We Find in Older Homes
- Aluminum branch wiring: Connections loosen and run warm. We pigtail or replace it.
- Ungrounded two prong circuits: No ground path for appliances. We add grounds or GFCI protection.
- Brittle cloth wire: Insulation cracks with age and heat. We replace those runs.
- Overloaded shared circuits: Several rooms on one breaker. We split them into new circuits.
- Open splices: Connections outside a box, often in attics. We put them in proper boxes.
- Missing boxes: Devices mounted straight in the wall. We add rated boxes.
Many homes have two or three of these at once. We document each one with photos during the walkthrough, so you can see exactly what we found and decide what to fix first.
Owners, Buyers and Sellers Who Call Us to Rewire
| Customer | Common Reason |
|---|---|
| Long time owners | Too few circuits and aging wire |
| New buyers | Rewire before moving furniture in |
| Sellers | Clear inspection and insurer notes |
| Landlords | A rewire rental property North Highlands units need between tenants |
| Insurance customers | Rewiring for insurance North Highlands carriers ask for |
Buyers often get the best value. Rewiring an empty house before move in day goes faster, costs less and avoids moving furniture around a working crew.
Sellers sometimes ask whether to rewire before listing or offer a credit instead. We give you a written scope and price either way, so you and your agent can decide which works better for the sale.
Rewiring Specialists for North Highlands 1950s Homes
Most local homes are single story ranch houses with attics above and crawlspaces below. That layout is good news for rewiring, because it gives us routes to run new wire without opening every wall.
We know these homes well. Original panel locations, common attic layouts and the way builders ran circuits in the 1950s shape how we plan each rewire. That experience means faster jobs and fewer surprises once walls are open.
We also know where the surprises tend to hide: old splices buried in attic insulation, circuits that wander between rooms and outlets added by past owners without boxes. Knowing where to look keeps the job on schedule.
Small Wall Openings and Clean Patching
Nobody wants their home torn apart. Here is how we keep the mess down:
- Fish wire through attics and crawlspaces wherever we can
- Cut small, neat openings only where needed
- Patch openings so they are ready for paint
- Cover floors and furniture in work areas
- Clean up dust at the end of every day
Most openings are no bigger than a hand, cut at the top of walls near the ceiling or behind switch plates where they are easy to patch. In closets and garages we may run surface conduit instead, which skips patching entirely.
We also plan the order of rooms around your daily life. Bedrooms can be finished first so everyone sleeps with power, and kitchens are scheduled to keep meals possible on most days. If you work from home, tell us which room is your office, and we will keep it powered as long as we can.
Permit and Inspection Included With Every Rewire
Rewiring needs a permit from Sacramento County Building Permits and Inspection. We file it, book the rough and final inspections and meet the inspector each time.
That final record matters. Insurers, refinance lenders and future buyers all want proof the work was permitted and done to the California Electrical Code by a C10 electrical license holder.
Skipping the permit can come back later. An unpermitted rewire may be questioned during a sale or an insurance claim, and fixing that after the fact usually means opening walls again. We file every time so you never face that problem.
You also get a simple map of your new circuits, showing which breaker feeds which room, so future repairs and additions are easier for you and any electrician who follows.
Rewiring Cost by Job Size
Your home rewire cost North Highlands depends on the home’s size, how many circuits change and how easy access is.
| Job | Typical Range |
|---|---|
| Whole home rewire, Sacramento area | $8,000 to $18,000 |
| Typical local rewire | About $13,125 |
| Partial rewire | Priced by circuit count |
| Aluminum pigtailing | Priced by device count |
Ranges from ConsumerAffairs and Networx North Highlands.
Here is how the main rewiring options compare:
| Pigtail Repair | Partial Rewire | Whole House Rewire |
|---|---|---|
| Lowest cost | Mid range cost | Highest cost |
| Keeps existing wire | Replaces worst circuits | Replaces all branch wiring |
| One to two days | A few days | About a week or more |
| Good for aluminum wire | Good for problem rooms | Good for brittle or failing wire |
If you are asking about rewire old house cost, we start with a free rewiring estimate North Highlands owners can compare side by side.
Book a Rewiring Walkthrough
Tell us your home’s age and what you have noticed. We will set up a walkthrough and give you a price range.
Rewiring FAQs for Older North Highlands Homes
Answers for anyone wondering who rewires old houses near me.
Whole home rewires in the Sacramento area often run $8,000 to $18,000, and local job data puts a typical rewire near $13,125. Partial rewires cost less.
Most families stay. We work room by room and restore power to finished areas at the end of each day where we can, and we clean up dust daily.
Yes. We make small, clean openings and patch them so they are ready for paint. We explain upfront what finish to expect.
Yes. Rewiring needs a Sacramento County permit and inspection, which we file and schedule. The final inspection record helps with insurance and resale.
Areas We Serve






